Windows 10 Startup Fails After SysPrep - Super User.

Looking for:

Windows 10 just a moment after sysprep free -  

Click here to DOWNLOAD

   

 

- Windows 10 Just a Moment Stuck? Use These Solutions to Fix It

 

In Audit Mode, you can configure your Windows reference image. We will take a look at several popular steps that sysops configure most often in their reference image. You can set your company branded info in the computer properties windows. The easiest way to configure these settings is through the registry.

Create a text file oem. To apply the reg file, double-click on it, and accept registry changes. As a result, these settings will be imported into the registry. You can install programs manually, or using the Windows 10 package manager — Chocolatey. Now install the Chocolatey. To do this, run the PowerShell console with administrator privileges. Enter the following commands:. Run the command:. On Windows 11, you can use the new built-in WinGet Package Manager to install the required software about programs available in WinGet repo.

To install the same set of programs, run the command:. Download and extract the driver packages to a specific directory. If you need to reboot Windows to install the application or update, you can do it. After reboot, the system will return to audit mode. You can clean up your driver repository from driver duplicates using our script.

Windows 10 and 11 collect information about the operation of users on the computer. Examples of handwriting and voice samples, location information, error reports, calendar contents — all of these can be sent to Microsoft servers. Run the elevated Command prompt, and execute the following commands:.

To perform a clean install of Windows 10 with the bootable USB flash drive, you need to follow these steps:. When entering the Windows setup interface, press the Next button to start the process. When entering the following interface, click the Install Now button to continue. If you're upgrading an old version, you must input a genuine product key.

However, if you're reinstalling Windows 10, you can press the I don't have a product key option to continue if your computer has been activated. Choose a Windows 10 edition that must match your product key and press the Next button to continue.

Check the I accept the license terms option and then press Next to continue. Then you need to choose where to install Windows Usually, it is a partition on Drive 0 that contains the current installation of Windows. Then, press the Delete button to remove it from the hard drive. Choose the empty partition and click on the Next button to start the installation process.

After the installation, you still need to customize the out-of-box experience to create a new account and set up your environment. Read this post to learn them and choose a proper one for OS reinstallation. When you are getting in the trouble of Windows 1 Just a moment loop, you can refer to these two solutions mentioned in this post to help you out.

It only takes a minute to sign up. Connect and share knowledge within a single location that is structured and easy to search.

I try to prepare a Windows 10 21H1 installation with sysprep for imaging. I activated OOBE and generalize. Sysprep says that it was successful, but it ran to quick and the log file setupact. The problem is that after a reboot I'm not presented with the OOBE first run setup stuff but just with the login screen for "other user" and I can't login there. The panther directory has an empty setuperr. Search for oem Hope your weekends were full of enjoyable stuff.

Online Events. Log in Join. Windows Hello all Thanks Spice 6 Reply Contest Details View all contests. Verify your account to enable IT peers to see that you are a professional.

Big Green Man This person is a verified professional. I went through the guided process one last time to set up a new account, call it TempAccount3. Improve this answer. Log onto the machine as local administrator and confirm the login is successful Go to Control Panel System Advanced system settings Advanced tab User Profiles section Settings Highlight and delete all Account Unknown accounts and any other accounts one-by-one other than Default Profile and the local administrator account you are signed on as now.

I appreciate the suggestions to try. I tried all of these steps, but unfortunately the issue still persists. I've had updating the BIOS in the back of my mind, so I went ahead and did that and reset to factory default, but still no luck. Per HP documentation it can only be done via the HP replicated setup linux based utility.

I can see in device manager that is is currently set to AHCI. Another thing to note is that I can do a clean install of 20H2 on this machine and sysprep it without any issues. I can sysprep the image on this machine without any issues.

The issue only occurs upon the first boot after updating to 20H2 and running sysprep — jwitt. It just so happens I do have a ISO and that was going to be my next step Finally, I have had success! Thank you very much for all the suggestions!

I will award you the bounty since some of your suggestions led me to the eventual solution.

 

[SOLVED] Windows 10 Syspreped image sticks in "Just a moment".windows 10 - OOBE not run after sysprep, only a login screen is displayed - Server Fault

 

Welcome to Monday And be careful as today may be more exciting and dangerous than many Mondays as today is also International Axe Throwing Day, a once Canadian backyard pastime that is now sweeping the globe!

I am in need of advice on how to setup a Air gap backup? My organization is building our Cybersecurity program. I am looking to begin logging and monitoring with a SIEM tool. The two that I am looking at are Datadog and Blumira. Does anyone have any input about either of these SIEM tools that has experience wit Welcome to the first Spark!

Hope your weekends were full of enjoyable stuff. Online Events. Log in Join. Windows Hello all Thanks Spice 6 Reply Contest Details View all contests. Verify your account to enable IT peers to see that you are a professional. Big Green Man This person is a verified professional. Spice 2 flag Report. Pretty much my thoughts exactly. Usually takes about 20 minutes to deploy the golden image and have it accessible to use on a workstation. Spice 1 flag Report. Jago Wu. Read these next The computer will automatically restart and boot to the Audit Mode.

Windows automatically boots and logs in with the built-in administrator account when in the Audit Mode. Further, this account will be disabled. Do not close the Sysprep utility window — you will need it at the end of the configuration step.

Minimize it. In Audit Mode, you can configure your Windows reference image. We will take a look at several popular steps that sysops configure most often in their reference image. You can set your company branded info in the computer properties windows. The easiest way to configure these settings is through the registry. Create a text file oem.

To apply the reg file, double-click on it, and accept registry changes. As a result, these settings will be imported into the registry. You can install programs manually, or using the Windows 10 package manager — Chocolatey. Now install the Chocolatey. To do this, run the PowerShell console with administrator privileges.

Enter the following commands:. Run the command:. On Windows 11, you can use the new built-in WinGet Package Manager to install the required software about programs available in WinGet repo. To install the same set of programs, run the command:. Download and extract the driver packages to a specific directory. If you need to reboot Windows to install the application or update, you can do it.

After reboot, the system will return to audit mode. You can clean up your driver repository from driver duplicates using our script. Windows 10 and 11 collect information about the operation of users on the computer. Examples of handwriting and voice samples, location information, error reports, calendar contents — all of these can be sent to Microsoft servers. Run the elevated Command prompt, and execute the following commands:. Starting with Windows 8.

Save the PSWindowsUpdate. Available updates will be downloaded from the Windows Update servers and installed automatically. Use the following PowerShell script to remove the preinstalled Windows 11 apps:. Copy the list of commands for your Windows build, paste them into the PowerShell console, and press Enter:. If your computer has a static IP address configured, specify that the address should be obtained automatically from a DHCP server.

You can do that in the network adapter settings. You can use an answer file together with the System Preparation Sysprep tool. It allows configuring unattended Windows Setup settings. This step is optional used to automatically specify various parameters that must be configured when the image is at first run. You can skip this step, and go straight to the step of capturing a Windows image. The answer file may contain the answer to each question.

This must be selected when installing Windows and choosing the initial settings region, language, product key, keyboard, account, and privacy setting, etc. Follow the steps during the out-of-box experience OOBE. You can create an answer file manually this is simple XML. Use the ADK version for the Windows version you want to deploy.

Run the adksetup. You will need install. You can copy the install. If only the install. SIM will prompt you to specify a Windows image file for which you want to create an answer file.

Specify the path to the before installed install. Wait for the SIM to mount the Windows installation image and create the catalog file. If you try to open the install. Select your Windows 10 edition. If there is only one edition of Windows in your install.